Call us for a free estimate

Well Drilling
  • Affordable Shiprock Water Well Drilling Service
  • Free Estimates on Water Well Drilling in Shiprock, NM
  • Reliable Shiprock Water Well Drilling Companies
Call Now (888) 404-5407

High Quality Water Well Drilling in Shiprock, NM

It is important to determine overall water well drilling cost in Shiprock beforehand. The variations in these costs range from $1,500 to $12,000 for most projects. Expect to shell-out between $15 and $30 dollars per foot of depth dug, or, for more difficult terrains, your costs could be somewhere around $50. When digging at shallow depths, expect to pay between $10 to $25 per every square foot. The most common reasons for initiating water well drilling include drawing water for residential home or agricultural needs. It is possible to draw up deeper geothermal fluids found in the ground to heat a home too.

Avg Costs for Well Drilling

Avg Costs for Well Drilling

Min Cost
$185

Max Cost
$1,504

Avg Cost
$831

Range
$670 - $993

Get the Best Water Well Drilling Services - Shiprock

Drilling for well water can be a major project best suited for professionals. Check and compare costs of several well drilling companies in Shiprock, NM to get an idea of overall expenses prior to starting the work. Expert well diggers can streamline the necessary permit process in your local area. Hiring a professional water well drilling company can help to ensure the overall safety of your property and everyone involved. While technically, a property owner could drill and install a well without hiring a professional, this is not recommended. The costs can mount up swiftly, and ensuring that everything is done within regulations can be confusing for the average property owner. Last, but not least, this is dangerous work that is best left to hired professionals.

What zipcode do you need Well Drilling in?

GET STARTED

~ OR ~

CALL US DIRECTLY


(888) 404-5407

Water Well Drilling in Shiprock FAQ

How much does it cost to have a well dug?

Costs for digging a well vary. The average cost to drill a new well is approximately $5,500 with an average well depth of 150 feet. A private well costs more initially, but over time costs of maintenance are cheaper saving up to $500 per year, and after it is installed you'll only pay for the electrical costs for the well pump. If you're digging to install a septic system, the project can cost from $2,600 to $8,000 with the average costing $5,000. All costs associated with digging and installing a septic system run around $5,000 to $23,000. However, if you're going for an agricultural water well, it tends to be more expensive than other types of wells. For residential irrigation wells, expect to pay anywhere from $5,000 to $12,000 and commercial irrigation wells can run upwards of $75,000.

What are some of the installation costs for water well digging?

In general, residential water well drilling is usually less expensive than commercial well digging jobs. To get an accurate and current price, you can leave your contact info above to request a quote or search for water well service in Shiprock, NM to get a rough idea about current prices in your specific geographical location. The type of well that you desire and its expected use can alter the estimated prices. An artesian well uses an aquifer instead of the more expensive-over-time electric pump other well types will require. The initial costs of an artesian well are higher, expect to pay $4,000 to $10,000, but the lowered maintenance and operational costs surpass this expense later. Drilling is more complex for these wells. The sand point well is the least expensive at about $200 to $1,500. This well is less reliable than others, and this well choice should be only used intermittently for best results.

Are there any price factors to consider when digging a well?

Yes, there are. Costs for water well installation vary greatly according to your location. The soil quality of the ground also affects the costs of the project. Lower ground water levels increase the drilling depth and the overall price. Obviously perhaps, deeper well digging will be far more expensive than digging shallow wells. Wells dug close to a home are also cheaper as electrical and water lines will be shorter. Permits are another factor to consider before drilling a well, since they are a must. These range from $5 to $500 depending on county and city location. Multiple permits may apply. You will also need to use a water testing kit to ensure that the water is safe. DIY water testing kits run about $30 to $100 giving instant results. These kits are less reliable than a professional test kit, so keep that in mind.

Last updated: 10/08/2023

Well Drilling Companies

  • All-A-Round Plumbing

    All-A-Round Plumbing

    P.O. Box 15246

    Farmington, NM 87499

  • Utley Plumbing & Heating

    Utley Plumbing & Heating

    6045 Hwy 64

    Farmington, NM 87401

  • Michael Carroll Services Lp Gas

    Michael Carroll Services Lp Gas

    721 Brianna Pl

    Farmington, NM 87401

  • Mountain Cove Construction Llc

    Mountain Cove Construction Llc

    Po Box 298

    Kirtland, NM 87417

  • E Z Plumbing Service

    E Z Plumbing Service

    Po Box 2052

    Farmington, NM 87499

  • Med Concrete

    Med Concrete

    4205 Terrace Dr

    Farmington, NM 87401

goodlatte

Where do you need the Well Drilling done?

Call us for a free quote